
ServicesShed Removal
Shed Removal in Plumas Lake
We take down the shed that has outlived its use, from rotted wood framing to dented steel panels, load every piece into our truck and clear the footprint. Nails, screws and shingle grit get picked up so the ground is safe to walk on.
Taking a shed down without wrecking the yard around it
A shed looks simple until you start pulling it apart. Wood sheds are usually 2x4 framing skinned in T1-11 or OSB siding, with an asphalt shingle roof and a plywood floor on pressure-treated skids. Metal kits are thin galvanized panels held by hundreds of small screws, and the cut edges are sharp. Resin sheds snap together but turn brittle after years of sun.
Each type comes apart in a different order, and that order matters for your yard. We remove the roof first, then the walls, then the floor, so pieces come down where we choose instead of falling onto fences, sprinklers or plantings. Panels are carried out rather than dragged, and the work area is cleaned as we go.
Before anyone touches a tool, you get a free, no-obligation estimate by phone with upfront pricing, so you know what the job includes before we arrive.
What shed removal covers
Emptying the contents
We pull out the old mowers, tools, bikes and boxes and haul off whatever you no longer want. Items you're keeping get set wherever you point.
Roof and wall teardown
Shingles and felt come off first, then sheathing and rafters. Walls are unscrewed or cut into manageable sections so nothing topples.
Floor and skid removal
Plywood decking and pressure-treated skids or joists are pried up and loaded. Rotted floors often crumble, so we bag the fragments instead of leaving them in the dirt.
Fastener sweep
Roofing nails, sheet-metal screws and staples scatter during teardown. We rake the footprint and run a magnetic sweeper across it before we leave.
Haul-off and sorting
Sound lumber and scrap metal are separated where practical for recycling, and the rest goes to the appropriate disposal site. You don't keep a debris pile at the curb.

Signs it's time to remove the shed
- Soft or sagging floor
- When the plywood flexes underfoot, moisture has reached the skids underneath. Rot spreads from there into the wall bottoms, and patching rarely holds.
- Roof leaks and curled shingles
- Long summer heat bakes asphalt shingles until they curl and crack, then winter rain finds the gaps. Water inside means swollen OSB and mildew on whatever you store.
- Rust through metal panels
- Surface rust is cosmetic, but holes at the base where panels meet the ground mean the structure is losing strength and letting pests in.
- Rodents, wasps or black widows
- Gaps at the floor line and under the eaves invite nesting. Once a shed becomes a habitat, removal is often easier than sealing it.
- You need the space back
- Maybe it's a new patio, a garden bed or a larger replacement. Clearing the old one first gives you a bare, level spot to plan around.
How the job runs on the day
- 1
Estimate by phone
Tell us the shed's size, material and what's inside, and whether the truck can get close. We give you a clear price up front, and the details you describe help us spot surprises early.
- 2
Prep and protection
We confirm any electrical feed has been disconnected by an electrician, mark sprinkler heads and set down tarps over lawn or pavers along the carry path.
- 3
Empty, then dismantle
Contents come out first. The structure comes down top to bottom with hand and power tools, and each section is carried straight to the truck.
- 4
Rake and sweep the footprint
We rake out wood chips and shingle grit, sweep for fasteners with a magnet and blow off nearby hardscape. You're left with bare ground or a swept slab.
What affects the price of shed removal
Every shed is quoted on what it takes to dismantle and how much material leaves your property. We explain each factor when we give your estimate by phone, and the price you hear is the price we hold unless the job itself changes.
- Size and construction
- A small resin kit is light and comes apart quickly. A framed wood shed with a shingle roof and a double floor takes more labor and fills more of the truck.
- Contents left inside
- An empty shed is faster. If it's still full, the hauling volume and sorting time add to the job.
- Foundation type
- Skids on gravel or concrete blocks lift out easily. A poured slab is heavier work; ask about our light demolition service if you want it broken out too.
- Access to the backyard
- A wide side gate lets us carry long sections straight out. Narrow side yards, steps or a long walk to the street add carrying time.
- Condition of the materials
- Badly rotted wood breaks into small pieces that need bagging, and rusted metal tears unpredictably. Both slow the work slightly compared with a sound structure.
Shed removal questions
- Do I need a permit to remove a shed?
- For a typical backyard shed, a demolition permit usually isn't required, but rules depend on size and whether the shed has power. If it's wired, the circuit must be disconnected by an electrician before we start. When in doubt, check with Yuba County or your city building department, and tell us what they say.
- Can you leave the concrete slab?
- Yes. Many people keep the slab as a base for a new shed or a patio. We clear it of debris and fasteners and sweep it off. If you want it gone, mention that during your estimate.
- What happens to the old paint, fuel and chemicals inside?
- Gasoline, pesticides, pool chemicals and wet paint can't go into the truck with general debris. We'll point out what needs to go to a household hazardous waste drop-off so you can set it aside. Everything else in the shed we can take.
- What if you miss something after the job?
- Our clean-space guarantee covers that. We sweep up before we leave, and if you find anything we missed, we come back and take care of it at no charge.
- Will the truck or crew damage my lawn?
- We carry material out by hand along a set path and lay tarps over grass and pavers in high-traffic spots. The truck stays on the driveway or street. A grass patch under the old shed will look pale, but the surrounding yard stays as you had it.
- Do you remove sheds outside Plumas Lake?
- Yes, we work throughout the area, including Olivehurst, Wheatland, Linda and Marysville. The estimate process is the same wherever you are.

Ready to clear that corner of the yard
Describe your shed and what's inside, and we'll give you a free, no-obligation estimate with upfront pricing. When we're done, the spot is raked, swept and ready for whatever comes next.